Jump to content

Paul77

Member
  • Content count

    44
  • Joined

  • Last visited

Community Reputation

0 Neutral

Previous Fields

  • Region OR County OR State of residence
    Wirral merseyside
  • Country
    Uk
  1. Feinwerkbau 65/80

    The buffer wasn't fully home in that pic, it was pushed further home when reassembling. The pic doesn't show it but it is slightly domed.
  2. Feinwerkbau 65/80

    Yes it's all sorted now, im didn't update the thread on here as there was no interest. There was one too many shims on the rear sled which was preventing it locking in the forward position. All now sorted and shooting perfectly Of another forum. Well after a long wait my, feinwerkbau grease finally arrived from Canada. I had already recived my maccari seals and spring front he USA. While in bits I oiled the grips and using an airbush touched up some of the worn parts on the frame. The seals were a perfect fit but the spring far too long, the pistol wouldn't cock with it in and I had a hell of a time getting it in the action. I think cut to the same length of the original it would be ok, something I'll try at a later date. Using a small amount of the fwb special grease (which doesn't combust) I lightly lubed the comp tube inside and outside. Once reassembled and with the correct shins on the recoil sledge it now shooting spot on. Maccari seal set Showing the piston ring seal The machining tolerances are superb
  3. Feinwerkbau 65/80

    Ive just bought an fwb80 which was missing one of the 0.05mm shim washers fitted to the rear of the recoil sled, I've made one out of a 0.05 mm feeler gauge. Ive got three 0.05 shims in front of thr guide and one at the rear and It now shoots and the action recoils and stays in the rear position. Im I right in thinking if I push it forward itll move around forward to back, and once cocked it'll move around freely or should it lock in the forward position? I believe it was a rivi member I bought it from. I've just bought a maccari mainspring and seal set for it from maccari, Ive also read that the cylinder should run almost dry, but am I right in thinking it should be lightly lubed with some moly? Or should I get the proper fwb lube. Fantastic pistol though
  4. New Pistol

    Had a go at some 10m single handed today, my first time i years, I won't be applying for the next Olympics that's for sure, but I guess I can only get better, certainly can't get any worse. Looks like I'm pulling my shots to the right too. This was my one and only go, I'll get another go later when I've got more time.
  5. New Pistol

    Cheers ray, gonna go have a go at some 10 m in a min, should be fun. This one will not be sold, I'll make sure of that.
  6. New Pistol

    Well I got another one to replace the one I sold a few years ago. Saw it on gunstar last night and went to pick it up from Cheshire gun room today. Near mint 1990 6g in original,box with instructions. I've just zeroed it in the garden and am very happy, can't wait to have a good shoot tomorrow with it.
  7. New Pistol

    Brilliant pistols I had one exactly like that, I sold it to roy Taylor, wish I still had it. Have fun ray.
×