Jump to content

supak111

Member
  • Content Count

    3
  • Joined

  • Last visited

Community Reputation

0 Neutral

Previous Fields

  • Region OR County OR State of residence
    midwest
  • Country
    usa
  1. here is the image again and another copy if that one get s deleted
  2. First ever PSI gauge mod. You can also replace the gauge with a charging niple from a paintball bottle so you could run your gun from paintball CO2 or HPA bottle. I will probably drill another hole on the other side for the charging nipple. (also pump mod, lighter hammer spring, and a lighter bolt spring by cutting down the white plastic check valve in half) Drilled a hole into the gun and the bolt, cleaned out all the sharp edges and shavings and screwed a paintball gun bottle 1-5k psi gauge into my gun. Now I can see how much pressure I have in my gun before I shot. With stock non moded pump I could only get upto 1200psi no matter how many times I pumped. With the pump mod, I can now reach 2000psi with about 15 pumps. Whats also cool is stock pump required 15ish pumps to get to 1200psi, with moded pump I can get to 1200psi in 6 or 7 pumps only. Also now when I pump my gun to 2000psi, since I did a lighter hammer spring by cutting about 4 rows from the spring I can shot the first shot and my PSI will only fall from 2000psi to 1200psi. This way I can still take a second shot right after without having to pump more. After second shot PSI is 0. PS. I ordered a 0-3k psi gauge for more accurate reading
  3. First ever PSI gauge mod. You can also replace the gauge with a charging niple from a paintball bottle so you could run your gun from paintball CO2 or HPA bottle. I will probably drill another hole on the other side for the charging nipple. (also pump mod, lighter hammer spring, and a lighter bolt spring by cutting down the white plastic check valve in half) Drilled a hole into the gun and the bolt, cleaned out all the sharp edges and shavings and screwed a paintball gun bottle 1-5k psi gauge into my gun. Now I can see how much pressure I have in my gun before I shot. With stock non moded pump I could only get upto 1200psi no matter how many times I pumped. With the pump mod, I can now reach 2000psi with about 15 pumps. Whats also cool is stock pump required 15ish pumps to get to 1200psi, with moded pump I can get to 1200psi in 6 or 7 pumps only. Also now when I pump my gun to 2000psi, since I did a lighter hammer spring by cutting about 4 rows from the spring I can shot the first shot and my PSI will only fall from 2000psi to 1200psi. This way I can still take a second shot right after without having to pump more. After second shot PSI is 0. PS. I ordered a 0-3k psi gauge for more accurate reading
×