• Announcements

    • DaveL

      VCR Bill

      Since the introduction of the "latest" VCR bill on 1st October 2007, sales of AIRGUNS (including replicas) AND MAJOR COMPONENTS (barrels, cylinders etc.) by DEALERS is restricted to a face-to-face transaction.   Please ensure you are familiar with the changes brought about due to the VCR act, which may be viewed on the BASC website.   BASC and ACPO have produced a guide to the VCR act in PDF format, which avoids legalese and is very understandable. See HERE.   AirGunForum members must ensure their transactions conform with current legislation before posting.   An inter-dealer network to facilitate the continuation of mail order business is being established by Portland Jon. Details are HERE or direct to his website HERE.
    • AirGunForum

      Editing your posts

      The forum's EDIT function has been changed. After making your post, you will have 30 minutes to review and edit it. After that, only Admin will be able to make edits.   Should a post NEED to be edited afterwards, email to admin@airgunforum.net the change details, the URL of the thread it applies to and if appropriate, the reason for the change. Don't forget to identify yourself and do use your registered email address to make contact. All this is necessary, as admin must be able to identify who you are and that it is your post that you wish to edit.   Admin. will make the edit if it appears necessary. Note, if you want to change something that could easily be achieved by adding a further post to the thread, you will be expected to do it.   Forum staff generally view new posts added to threads since their last visit. If a "for sale" item has been sold or a wanted item has been obtained, just add a post to the thread and it will usually be noted and the thread title will be edited appropriately. This saves members' time wading through posts that are effectively "dead".   DaveL
Sign in to follow this  
colyshooter

Best Pellets for Steyr LG110 (HP)

Recommended Posts

Could anybody tell us the best pellets to use with a Steyr LG110. I'm told 4.53 probably best but aren't these a bit large?

 

Also, is there a make of silencer (with adapter) that can remain in place and still let you take the cylinder off?

 

 

Thanks for any advice

Share this post


Link to post
Share on other sites
Could anybody tell us the best pellets to use with a Steyr LG110. I'm told 4.53 probably best but aren't these a bit large?

 

Also, is there a make of silencer (with adapter) that can remain in place and still let you take the cylinder off?

Thanks for any advice

 

Mozzies / JSB Exact Express in 4.52 went well in my Steyrs but then so do AA Field 4.52. JSB Exacts 4.51 ,4.52 and 4.53.

Try some and see. It is down to the barrel.

hth

Barry

Share this post


Link to post
Share on other sites

If its the new (2011 long barrel) Steyr ive found 4.52 JSB Exact to be the best in mine. Apparently the barrel was designed from the outset to use JSB pellets. The choke is very small on both mine and a friends gun and needs a fair ammount of running in (2-3000 pellets). Ive tried all the usual suspects including Mossies & JSB express and found JSB exacts group best. My barrel does not like the new black tin AA at all (shotgun groups)

Share this post


Link to post
Share on other sites
If its the new (2011 long barrel) Steyr ive found 4.52 JSB Exact to be the best in mine.

 

Same with mine. 4.52 JSB Exact will do the best job in the long (55cm) barrel.

Share this post


Link to post
Share on other sites
If its the new (2011 long barrel) Steyr ive found 4.52 JSB Exact to be the best in mine. Apparently the barrel was designed from the outset to use JSB pellets. The choke is very small on both mine and a friends gun and needs a fair ammount of running in (2-3000 pellets). Ive tried all the usual suspects including Mossies & JSB express and found JSB exacts group best. My barrel does not like the new black tin AA at all (shotgun groups)

 

Paul . send those black tin air arms down to me then mate :qq: How is it going now ??? HOLLY :thumb:

Share this post


Link to post
Share on other sites
Paul . send those black tin air arms down to me then mate :qq: How is it going now ??? HOLLY :thumb:

Ive hopefully :beg: cured it now Hols, since ive sleeved the barrel the POI shifts have gone. Ive a few problems with velocity inconstancy's which im hoping are down to the hammer spring bedding in. Im using the black transfer port which im lead to believe gives more consistency. Im a LOT happier than i was a few months ago so time behind the trigger will tell. :thumb:

Share this post


Link to post
Share on other sites
Ive hopefully :beg: cured it now Hols, since ive sleeved the barrel the POI shifts have gone. Ive a few problems with velocity inconstancy's which im hoping are down to the hammer spring bedding in. Im using the black transfer port which im lead to believe gives more consistency. Im a LOT happier than i was a few months ago so time behind the trigger will tell. :thumb:

Well that is good news . what scope do you use now ??? HOLLY

Share this post


Link to post
Share on other sites
Well that is good news . what scope do you use now ??? HOLLY

After spending the money ive stuck with the March, its taken a while to get used too and im still mis-ranging occasionally but im getting there (slowly) the old Nikko is still there in its box as a back up but i think im winning with it now.

Share this post


Link to post
Share on other sites

In that case paul . there is no reason why you cannot get among the big boy's this year ??? HOLLY :):thumb:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this