First ever PSI gauge mod. You can also replace the gauge with a
charging niple from a paintball bottle so you could run your gun from
paintball CO2 or HPA bottle. I will probably drill another hole on the
other side for the charging nipple.
(also pump mod, lighter hammer spring, and
a lighter bolt spring by cutting down the white plastic check valve in
Drilled a hole into the gun and the bolt,
cleaned out all the sharp edges and shavings and screwed a paintball gun
bottle 1-5k psi gauge into my gun. Now I can see how much pressure I
have in my gun before I shot.
With stock non moded pump
I could only get upto 1200psi no matter how many times I pumped. With
the pump mod, I can now reach 2000psi with about 15 pumps. Whats also
cool is stock pump required 15ish pumps to get to 1200psi, with moded
pump I can get to 1200psi in 6 or 7 pumps only.
now when I pump my gun to 2000psi, since I did a lighter hammer spring
by cutting about 4 rows from the spring I can shot the first shot and my
PSI will only fall from 2000psi to 1200psi. This way I can still take a
second shot right after without having to pump more. After second
shot PSI is 0.
PS. I ordered a 0-3k psi gauge for more accurate reading
Edited by supak111, 15 April 2013 - 06:44 PM.